Industrial Dryers

Versatile Drying method (Batch or Continuous Type) used for drying for various types of Liquid concentrates efficiently. It can also reduce the energy requirement of a spray dryer plant when used as a second stage dryer for production of instant quality powders. 
Fluid bed dryer comprises of a top fluidizing chamber & a bottom air distribution chamber separated by a specially designed perforated plate.
The feed of wet materials is dried by intimate contact with hot air when the material is in a fluidized state. A vibrating mechanism can be attached to give a forward motion cum agitation to the product at a controlled rate. It is also used as second stage dryer for many products.

Spin Flash Dryer is ideal for drying of wet cake, slurry, paste which is normally difficult to dry in other dryers. The material is fed by screw feeder through a variable speed drive into the vertical drying chamber where it is heated by hot air and at the same time disintegrated by a specially designed disintegrator. The heating of air may be direct or indirect depending upon the application. The dry powder is collected through cyclone separator / bag filter or with combination of both.

This type of dryer is used for converting concentrated material to solid/semi solid form. This is designed with vacuum system / without vacuum system. Solvents/water is collected through condenser.
Feed is pumped to heat exchanger where it is scrapped /agitated through series of multiple blades on the inner surface of a vertical shell and shell is heated by steam. Due to vigorous agitation the heat transfer is fast and slurry is converted to solid/semi-solid form.

It is basically a combination of Spray dryer and Fluid Bed dryer used over multi stages of drying which comprises of the following: